search this site

Conduct your own green energy experiments with Phidgets


1011 - PhidgetInterfaceKit 2/2/2$50.00
back to product menu

Product Description
Designed for customers who only need a couple of Analog Inputs, Digital Inputs or Digital Outputs, the dongle size PhidgetInterfaceKit 2/2/2 is ideal for projects where space is critical.

Product Features
• Dongle Size
• 2 Analog Inputs with configurable data acquisition rates
• 2 Digital Inputs with hardware noise filtering
• 2 Digital Outputs
• Plugs directly into a computer's USB Port

Digital Inputs
The Digital Inputs have a Digital Input Hardware Filter to eliminate false triggering from electrical noise. They can be used to convey the state of devices such as push buttons, limit switches, relays, and logic levels.

Digital Outputs

The Digital Outputs can be used to drive LEDs, solid state relays (such as the 3052 SSR Relay Board), transistors; in fact, anything that will accept a CMOS signal.

Comes packaged with:
A 3013 – 12-Wire Custom Cable

Wire Assembly
Wires 1,2,3 and wires 7,8,9 end with a female connector designed to take the Phidget sensor cable. The other wires are loose.
wire_diagram
Related Products

If your cable assembly gets damaged, just get a replacement cable:
3013 – PhidgetInterfaceKit 2/2/2 replacement cable

Product Specifications
Characteristic Value
Board
USB Voltage 4.75 to 5.25 VDC
USB-Power Current Specification Max 500 mA
Quiescent Current Consumption 20 mA
Available External Current (source) 480 mA
Analog Inputs
Impedance 900K ohms
SV Reference Error Max 0.5%
Update Rate 1000 samples/second max
Digital Inputs
Pull-Up Resistance 15K ohms
Low Voltage (True) 0.8V Max
High Voltage (False) 2.1V Min
Maximum Voltage ±15V
Update Rate ~125 samples/second
Digital Outputs
High Level Source Current 80mA Max
Low Level Sink Current 150mA Max
Series Resistance 300 ohms
Update Rate ~125 samples/second
Operating Temperature 0 - 70°C



contact info@greenenergyresearach.com to confirm freight charges