Conduct your own green energy experiments with Phidgets


1017 - PhidgetInterfaceKit 0/0/8$90.00

back to product menu

Product Description
The PhidgetInterfaceKit 0/0/8 provides Small Signal Relays with 8 Relay Outputs, rated at 250VAC, or 2 Amps, for a maximum of 65 Watts. It is typically used for switching small signals, as opposed to high current applications. For high current applications see the 1014 - PhidgetInterfaceKit 0/0/4. The relays are Double Pole Double Throw (DPDT).

• Maximum DC Switching Voltage: 220VDC
• Maximum DC Switching Current: 2 Amps
• Maximum AC Switching Voltage: 250VAC
• Maximum AC Switching Current: 2 Amps

Note: When a relay is in one switch position for a period of time, oxidation of the open contact(s) can occur. Depending upon the internal coating material of the contacts, oxide films of varying density will be displaced upon the surface of open contacts; this film acts as an insulator to current flow. When the relay is switched, a certain amount of current flowing through the contacts, known as the wetting current, is required to remove the film of oxides and ensure proper conduction. The wetting current required to operate this relay is low enough for use in signal switching applications.

Product Features
• Allows the digital control of 8 Double-Pole Double-Throw (DPDT) relay outputs
• Used to switch small signals Rated at 250VAC, or 2 Amps, for a maximum of 60 Watts
• Connects directly to a computer’s USB port

Comes packaged with:
• A 3001 - 120cm Custom USB Cable
• A mounting hardware kit

Resources
• product manual
• programming resources


*For shipments outside of USA, please email info@greenenergyresearch.com to confirm freight charges