Conduct your own green energy experiments with Phidgets
1064 - PhidgetMotorControl HC $120.00 back to product menu
Product Description
The PhidgetMotorControl HC allows you to control the angular velocity and acceleration of up to two high-current DC motors.
Many variations of brushed DC motors exist: permanent magnet motors, electromagnet motors, coreless motors, linear motors... the PhidgetMotorController can be used with any of these, as well as other devices like small solenoids, incandescent light bulbs, and hydraulic or pneumatic devices like small pumps and valves.
Product Features
• Control the velocity and acceleration of up to two high-current DC motors
• Requires an external 6 to 15VDC external power supply
• USB port is isolated from the motor control outputs
• Connects directly to a computer’s USB port.
Product Specifications
Characteristic |
Value |
---|---|
Output Controller Update Rate | 50 updates/second |
Velocity Resolution | 1.5% |
Acceleration Resolution | 1.5% Velocity/Second2 |
Acceleration Limit (-100% to +100% velocity) | 120ms |
PWM Frequency | 20kHz |
Minimum Power Supply Voltage | 6VDC |
Maximum Power Supply Voltage | 15VDC |
Continuous Motor Current | 14A |
Peak Motor Current - 60 seconds | 19A |
Peak Motor Current - 10 seconds | 25A |
Peak Motor Current - 2 seconds | 32 |
Motor Overcurent Trigger on Load | < 100mΩ (50A typical) |
Device Active Current Consumption | 100mA max |
Product Description
• Provides bi-directional control to 2 DC motors
• Requires external 6 to 15VDC Power Supply
• USB port is isolated from the motor control outputs
• Over voltage, over temperature, over current conditions are fed back to the API on the PC
Comes packaged with:
• A 3001 - 180cm USB Cable
Resources
• Product Manual
• Programming Resources
*For shipments outside of USA, please email info@greenenergyresearch.com to confirm freight charges