Conduct your own green energy experiments with
Phidgets
3051 - Dual Relay Board$19.60
back to product menu
Product Features
• The 3051 contains 2 relays for switching AC or DC power.
• The relays are Single Pole Double Throw (SPDT)
• The relays can switch up to 240 V AC at 10 Amps and 100 V DC at 5 Amps.
Product Description
The Dual Relay Board allows you to control larger loads and devices like AC or DC motors, electromagnets, solenoids, and incandescent light bulbs.
Product Specifications
• The 3051 contains 2 relays for switching AC or DC power
• The relays are Single Pole Double Throw (SPDT)
• The relays can switch up to 240 V AC at 10 Amps and 100 V DC at 5 Amps
• The terminal blocks accept 12-24 AWG wires
Related Products
Note: All relay contacts will slowly oxidize over time, depending on their construction. When the relay is switched, a certain amount of electricity is required to break through the oxide layer. The relays on the 0/0/4 have a minimum switching current of 100mA @ 5VDC, and therefore are not suitable for switching signals.
If you are looking for a product to do signal switching see 1017 PhidgetInterfaceKit 0/0/8.
We also have a 4-Relay board that can plug directly into your PC. See the 1014 – PhidgetInterfaceKit 0/0/4.
Comes packaged with:
• A
3002 – 60cm Sensor Cable
Resources
•
Product Manual
Previous versions of the Product Manual
• Product Manual – board revision 0
• This sensor connects to an Analog Input on the:
•
1018 - PhidgetInterfaceKit 8/8/8
•
1019 - PhidgetInterfaceKit 8/8/8 w/6 Port Hub
•
1070 - PhidgetSBC
•
1203 - PhidgetTextLCD
*For shipments outside of USA, please email
info@greenenergyresearch.com to confirm freight charges