Conduct your own green energy experiments with Phidgets
3052 - SSR Relay Board$15.45 back to product menu
Product Features
• Switches up to 2.5 Amps at up to 40 Volts DC, or 28 Volts AC.
• Can be used to control larger loads and devices like AC or DC motors, electromagnets, solenoids, and incandescent light bulbs.
Product Description
Solid State Relays, or SSRs, are devices designed to operate like standard relays but without mechanical motion.
The SSR Board is safe to use with sensitive control devices like microprocessors, and will not damage a Phidget device or your PC. Optoisolation between the control inputs and outputs of the SSR in the form of a GaAs LED paired with a set of optically-controlled MOSFETs provides protection from output to input. An on-board 47V bidirectional transorb across the relay output protects the board from static electricity and surges from inductive loads.
Related Products
If you need two relays to switch up to 9amps you should consider the 3053 - Dual SSR Relay Board.
Comes packaged with:
• A 3002 – 60cm Sensor Cable
Resources
• Product Manual
This relay connects to an Analog Input on the:
• 1018 - PhidgetInterfaceKit 8/8/8
• 1019 - PhidgetInterfaceKit 8/8/8 w/6 Port Hub
• 1070 – PhidgetSBC
• 1203 – PhidgetTextLCD
Product Specifications
Characteristic |
Value |
---|---|
Output Contact on Resistance | 0.05 ohms |
Maximum DC Switching Voltage | 40 VDC |
Maximum AC Switching Voltage | 28 VAC |
Maximum Switching Current (AC or DC) | 2.5A |
Maximum Continuous Switching Current | 2.5A |
Maximum Pulsed Current (AC or DC, PW 100ms one shot) | 5A |
Maximum Switching Speed | 20 cycles/second |
*For shipments outside of USA, please email info@greenenergyresearch.com to confirm freight charges