Conduct your own green energy experiments with Phidgets
3053 - Dual SSR Relay Board $30.90 back to product menu
Product Description
Solid State Relays, or SSRs, are devices designed to operate like standard relays but without mechanical motion.
The SSR Board is safe to use with sensitive control devices like microprocessors, and will not damage a Phidget device or your PC. Optoisolation between the control inputs and outputs of the SSR in the form of a GaAs LED paired with a set of optically-controlled MOSFETs provides protection from output to input. An on-board 47V bidirectional transorb across the relay output protects the board from static electricity and surges from inductive loads.
Related Products
If you only need one relay to switch up to 2.5amps you should consider the 3052 - SSR Relay Board.
Resources
• Product Manual
This relay connects to an Analog Input on the:
• 1018 - PhidgetInterfaceKit 8/8/8
• 1019 - PhidgetInterfaceKit 8/8/8 w/6 Port Hub
• 1070 – PhidgetSBC
• 1203 – PhidgetTextLCD
Product Features
• Contains 2 relays for switching up to 9 Amps at up to 40 Volts DC, or 28 Volts AC
• Can be used to control larger loads and devices like AC or DC motors, electromagnets, solenoids, and incandescent light bulbs.
Product Specifications
Characteristic |
|
---|---|
Output Contact on Resistance | 0.05 ohms |
Isolation Voltage (Input to Output), time=60ms minimum | 5300Vrms |
Working Voltage for Isolation | 2500Vrms |
Maximum DC Switching Voltage | 40VDC |
Maximum AC Switching Voltage | 28VAC |
Maximum Switching Current (AC or DC) | 9A per channel |
Maximum Continuous Current @ 25°C (AC or DC) | 9A per channel |
Min/Max Input Voltage (Control) | 3 to 30V |
Maximum Switching Speed at Zero load | 300 Hz |
Turn-On Time at Zero load with 50 Ohm input impedance | 900 μs |
Turn-On Time switching 9A with 50 Ohm inut impedance | 1.4 ms |
Turn-Off Time at Zero load | 160 μs |
Turn-Off Time switching 9A | 160 μs |
Turn-On Time at Zero load using 8/8/8 on inputs | 1.90 ms |
Turn-Off Time at Zero load using 8/8/8 on inputs | 130 μ |
Input Wire Gauge | 16-26 AWG |
Output Wire Gauge | 12-24 AWG |
*For shipments outside of USA, please email info@greenenergyresearch.com to confirm freight charges.