search this site

Conduct your own green energy experiments with Phidgets

3060 - USB Isolator $60.00

back to product menu

Product Description
The USB Isolator is designed to protect your PC from harmful voltage that can flow from devices attached to your PC through the USB cable. The isolator is inserted between the Phidgets board and your PC.

The USB Isolator can also be used to eliminate problems caused by ground "voltage" differences between USB Host and USB devices. The USB Isolator can be very useful for stabilizing systems using Thermocouples, pH sensors, motor controllers with external power supplies, and Phidget Analog. Have a look at the technical information section of the Product Manual.

Product Features

• Protects your PC from overvoltage
• Increases system stability
• Protects from overvoltages up to 1kV
• USB speed selectable


Product Manual
Mechanical Drawings
Download 3D Step File

Product Specifications
USB Input Voltage 4.5 to 5.35VDC
USB Output Voltage 5VDC
Isolation Voltage 1kV
Maximum USB Current available 350mA
Current Consumption 29mA
Voltage Regulator Efficiency 73%

Useful Cables
You can use the following cables to connect the 3060 – USB Isolator to your PC. Use a Mini-USB to connect the 3060 to your PC and use a Mini-USB or a USB cable to connect your relay, motor controller or InterfaceKit board to the 3060 depending on the connector on your board.

3011 – USB Cable 30cm 28AWG
3001 – USB Cable 180cm 28AWG

*For shipments outside of USA, please email to confirm freight charges.