3316 - PM20L-20-14 50g-cm Unipolar Stepper$5.70
back to product menu
Product Features
• Small Torque
• Step angle: 18°
• Holding Torque: 50 g-cm @ 0.08 Amp
Product Description
This motor is good for turning small knobs, buttons, etc.
Motor Controller and Connection
The 3316 stepper motor connects to:
• 1062 - PhidgetStepper Unipolar 4-Motor
• 1063 - PhidgetStepper Bipolar 1-Motor.
The following table shows how to connect the motor wires to the 1062 board connectors to get clockwise rotation. To wire for counter-clockwise rotation, swap the Black and White wires.
Wire Color | Orange | Red | Yellow | Black | White | Brown |
Board Connector | + | A | B | C | D | + |
To connect the motor to the 1063, leave out the Orange and Brown wires.
Note: Make sure to unplug the power cord from the controller board before switching wires around.
• Resources
• Wantai Data Sheet
Product Specifications
Characteristic |
Value |
---|---|
Step Angle | 18° |
Step Accuracy | 7% |
Holding Torque | 50 g-cm / 0.69-in |
Voltage | 12V |
Rated Current | 0.08A |
Shaft Diameter | 1.5mm |
Weight | 24g |
Number of Leads | 6 |
*For shipments outside of USA, please email info@greenenergyresearch.com to confirm freight charges