Conduct your own green energy experiments with Phidgets
1012 - PhidgetInterfaceKit 0/16/16 $100.00
back to product menu
Digital Inputs
The Digital Inputs are activated by an external voltage source, triggering on a wide voltage range - 4 to 30VDC. They provide built-in filtering, to eliminate false triggering from electrical noise. They can be used to convey the state of on/off devices, such as push buttons, limit switches, relays.
Digital Outputs
The Digital Outputs can be used to directly control substantial devices, switching up to 30VDC at up to 2 Amps. The Output acts as a switch to ground, and is protected from transient voltages typical when switching inductive devices - relays, solenoids, motors. The Outputs can be used to directly control devices requiring substantial power such as incandescent lights, high power LEDs, relays, solenoids, motors..
Product Features
• 16 Digital Inputs - with hardware noise filtering - sensing up to 30VDC
• 16 Digital Outputs controlling up to 30VDC
• LED indicators on all I/O channels
Resources
• product manual
• programming resources
Comes packaged with:
• A 3001 - 180cm USB Cable
• A mounting hardware kit
Product Specifications
Characteristic | Value |
Digital Input Impedance (-0.5V to +5.5V) | 110KkΩ |
Digital Input Impedance (>5.5V) | 10kΩ |
Digital Optput Impedance (on) | 0.2kΩ |
Digital Input Update Rate | 125 updates/second |
Digital Input Minimum Event Detection Time | 3ms |
Digital Output Update Rate | 125 updates/second |
Digital Output Current Sinking (30V) | 2A max |
USB Power Current Consumption | 500mA max |
Device Quiscent Current Consumption | 18mA |
*For shipments outside of USA, please email info@greenenergyresearch.com to confirm freight charges